{"title":"Belcher Engineering Vintage Performance Products","description":"\u003cp\u003eBelcher Engineering Vintage Performance Products. Manufactured by our team here in Suffolk (or assembled) to create the ultimate performance experience.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"cylinder-heads-allard-inscribed-flat-head-21-stud","title":"Cylinder Heads Allard Inscribed Aluminium Ford Flat Head 21 Stud","description":"\u003cp\u003eAllard Cylinder Heads, Belcher Engineering Ltd manufactured - in stock.\u003c\/p\u003e\n\u003cp\u003ePair of Allard 21 stud flathead speed heads, manufactured by Belcher Engineering Ltd. Also included are a set of 8 Spark Plugs that we recommend for use with these heads.\u003c\/p\u003e\n\u003cp\u003eThese are speed Heads and are remanufactured by Belcher Engineering Ltd.\u003c\/p\u003e\n\u003cp\u003e8 to 1 compression, made from LM 24 TF aluminium.\u003c\/p\u003e\n\u003cp\u003eIdeal for hot rods, rat rod, speedsters etc etc or anyone looking for speed with their 21 stud engine.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan\u003eYou can expect some marks on the machined side of the head, this often forms as part of the casting process.  It is not a quality control process and because the heads are chemically dipped to ensure the are not porous.  This will have no material impact on the heads performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003ePlease note that most performance parts increase the wear on an engine.  BE is not responsible for any premature wear or failure to customers engines as a result of using our parts\/performance equipment.\u003c\/p\u003e\n\u003ch3\u003eFurther parts\/options Include:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\" data-mce-style=\"font-size: 1.4em;\"\u003eDrilled heater holes in the cylinder head as required.  \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\" data-mce-style=\"font-size: 1.4em;\"\u003ePlease add BE2100 (Cylinder Head heater hole to your basket).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\" data-mce-style=\"font-size: 1.4em;\"\u003eWe\u003c\/span\u003e\u003cspan style=\"font-size: 1.4em;\" data-mce-style=\"font-size: 1.4em;\"\u003e recommend our Cylinder head bolt and gasket set.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\" data-mce-style=\"font-size: 1.4em;\"\u003ePlease add BE2004 Cylinder head gasket and bolt set to your basket\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWeight: 6.5KG \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note some pictures shown are customer examples where they have had them painted or shown with other accessories.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Belcher Engineering","offers":[{"title":"Non Polished","offer_id":40048958013527,"sku":"BE2000","price":1243.58,"currency_code":"GBP","in_stock":false},{"title":"Polished","offer_id":40048958079063,"sku":"BE2001","price":1446.58,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be2000-cylinder-heads-allard-inscribed-flat-head-21-stud-29561908658263.png?v=1698144626"},{"product_id":"cylinder-head-gem-high-compression-model-a-b-1","title":"Cylinder Head Ford Model A \u0026 Model B Aluminium High Compression 7:1 GEM","description":"\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eCylinder Head -GEM Aluminium High Compression 7:1 - Ford Model A \u0026amp; B\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eThis is the Ultimate Cylinder Head for Ford Model A and B owners.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eBelcher Engineering have developed and manufactured this Model A and B cylinder head specifically to the increase performance of your Vintage Model A or B.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eWith 7:1 Compression and made of LM24FT ally in cast form it fits a standard water pump and distributer.  \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eNote this is a higher compression than regular police heads.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eThis Cylinder head comes as part of a kit that includes: The cylinder head, spark plugs, head gasket and BE Quality Controlled and Manufactured High Compression Head Studs. \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eWe have been manufacturing and selling these cylinder heads for many years and they are well proven and reliable.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eWatch performance run at Pendine Sands: \u003ca href=\"https:\/\/www.instagram.com\/p\/CRn8qiylT5e\/?utm_source=ig_web_copy_link\" title=\"Ford Model A Pendine Sands\"\u003ehttps:\/\/www.instagram.com\/p\/CRn8qiylT5e\/?utm_source=ig_web_copy_link\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e(It does not include a water pump, distributer or other accessories shown on some of the pictures).\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eImportant Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eNote that this head is not suitable for engines with a white metal bottom end.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003eThe head is designed around standard Model A Valves, however they could be altered to accommodate larger valves as there is material\/space available.  Clearly further machining work would invalid our warranty and be at the owners risk.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eYou can expect some marks on the machined side of the head, this often forms as part of the casting process.  \u003cspan style=\"text-decoration: underline;\"\u003eIt is not a quality control process issue,\u003c\/span\u003e note the heads are chemically dipped to ensure the are not porous.  These marks will have no material impact on the heads performance, they occur on most non polished aluminium castings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003ePlease note that most performance parts increase the wear on an engine.  BE is not responsible for any premature wear or failure to customers engines as a result of using our parts\/performance equipment.\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Standard","offer_id":40039481245783,"sku":"BE-1000","price":1214.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/Ford_Model_A_Aluminium_Cylinder_Head.png?v=1747485977"},{"product_id":"drag-link-rhd-top-quality-be-made-uk-a3305-a-3305","title":"Steering Arm Drag Link (RHD) Ford Model A 28-31 A-3305","description":"\u003cp\u003eDrag Link (RHD) Tube Ford Model A 28-31 A-3305\u003c\/p\u003e\n\u003cp\u003eModel A Drag link Tube.  \u003c\/p\u003e\n\u003cp\u003eB.E. Manufactured\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eDrag link right hand drive ,made from en16T material does not include hardware\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40045441450071,"sku":"A-3305","price":148.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-a3305-drag-link-rhd-top-quality-be-made-uk-29843165675607.jpg?v=1698144989"},{"product_id":"cylinder-heads-gem-inscribed-flat-head-21-stud","title":"Cylinder Head Ford FlatHead V8 Aluminium 21 Stud 1932-1948 GEM Inscribed","description":"\u003cp\u003eFord Flathead V8 High Compression Cylinder Heads, Belcher Engineering Ltd manufactured\u003c\/p\u003e\n\u003cp\u003eCylinder Heads (GEM Inscribed) -Ford Early V8 FlatHead 21 Stud 1932-1948\u003c\/p\u003e\n\u003cp\u003ePair of GEM 21 stud flathead speed heads, manufactured by Belcher Engineering Ltd. Also included are a set of 8 Spark Plugs that we recommend for use with these heads.\u003c\/p\u003e\n\u003cp\u003eThese are speed Heads and are remanufactured by Belcher Engineering Ltd.\u003c\/p\u003e\n\u003cp\u003eHigh Compression 8 to 1 compression, made from LM 24 TF aluminium.\u003c\/p\u003e\n\u003cp\u003eIdeal for hot rods, rat rod, speedsters etc etc or anyone looking for speed with their 21 stud engine, the ultimate power upgrade.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eYou can expect some marks on the machined side of the head, this often forms as part of the casting process.  It is not a quality control process and because the heads are chemically dipped to ensure the are not porous.  This will have no material impact on the heads performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\"\u003ePlease note that most performance parts increase the wear on an engine.  BE is not responsible for any premature wear or failure to customers engines as a result of using our parts\/performance equipment.\u003c\/p\u003e\n\u003ch3\u003eFurther parts\/options Include:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eDrilled heater holes in the cylinder head as required.  \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003ePlease add BE2100 (Cylinder Head heater hole to your basket).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eWe\u003c\/span\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e recommend our Cylinder head bolt and gasket set.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003ePlease add BE2004 Cylinder head gasket and bolt set to your basket\u003c\/span\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note that most performance parts increase the wear on an engine.  BE is not responsible for any premature wear or failure to customers engines.\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Non Polished","offer_id":40049022697559,"sku":"BE2002","price":1243.58,"currency_code":"GBP","in_stock":true},{"title":"Polished","offer_id":40049022828631,"sku":"BE2003","price":1375.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be2002-cylinder-heads-gem-inscribed-flat-head-21-stud-29857242742871.png?v=1698145053"},{"product_id":"drag-link-lhd-top-quality-be-made-uk-a3305-a-3305","title":"Steering Arm Drag Link Tube (LHD) Ford Model A 1928-31 A-3305","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDrag Link Tube\u003c\/span\u003e - A-3305\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLHD\u003c\/p\u003e\n\u003cp\u003eFord Model A 1928-1931\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVery good quality, USA made, link that runs from the pitman arm at the steering box to the front steering arm. This is the link only, it does not have any of the guts in it.\u003c\/span\u003e\u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40050713788503,"sku":"A-3305","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/DragLinkTubeA-3305.jpg?v=1758526322"},{"product_id":"layshaft-cluster-gear-shaft-be-manufactured-a7111-a-7111","title":"Layshaft (Cluster gear shaft) Ford Model A 28-31 BE Manufactured A-7111-B\/E","description":"\u003cp\u003eTop quality Made by BE in the UK from hardened and ground shaft. Does not wear like the USA made one.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor Model A Ford.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40057051185239,"sku":"A-7111-B\/E","price":36.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-a7111-layshaft-cluster-gear-shaft-be-manufactured-29882558316631.png?v=1698145135"},{"product_id":"gem-allard-cylinder-head-gasket-felpro-set-and-be-cylinder-head-bolts","title":"GEM\/Allard Cylinder Head Gasket (FelPro) set and BE Cylinder Head Bolts","description":"\u003cp\u003eHigh performance in house manufactured cylinder head bolts and good quality gasket set.\u003c\/p\u003e\n\u003cp\u003eSuitable for both Allard and GEM 21 stud V8 Cylinder heads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40065113227351,"sku":"BE2004","price":346.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be2004-gem-allard-cylinder-head-gasket-felpro-set-and-be-cylinder-head-bolts-29902906785879.jpg?v=1698145432"},{"product_id":"plug-leads-spark-plug-leads-4-cylinder-braided-set","title":"Ignition Lead Set 4 Cylinder Braided Set","description":"\u003cp\u003eComplete Ignition Lead Set\u003c\/p\u003e\n\u003cp\u003eSuitable for 4 cylinder engines (vintage\/classic).\u003c\/p\u003e\n\u003cp\u003eBeautiful braided brown and white set.\u003c\/p\u003e\n\u003cp\u003eCopper HT lead \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40209056530519,"sku":"BE10000","price":42.83,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be10000-plug-leads-spark-plug-leads-4-cylinder-braided-set-30493430120535.jpg?v=1698146511"},{"product_id":"plug-leads-spark-plug-leads-4-cylinder-black-set","title":"Ignition Lead Set 4 Cylinder (Ford Model A 1928 to 1931, Ford Model B 1932 to 1934)","description":"\u003cp\u003e4 Cylinder spark plug leads set, suitable for Vintage\/Classic cars.\u003c\/p\u003e\n\u003cp\u003eBlack smooth  leads and black boots.  Silicone  - \u003cspan\u003eResistive core HT cable \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for Ford Model A 1928 to 1931 and  Ford Model B 1932 to 1934 and various other 4 cylinder applications. \u003c\/p\u003e\n\u003cp\u003eThis set is already made up, and ready to install. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40209060397143,"sku":"BE10001","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be10001-plug-leads-spark-plug-leads-4-cylinder-black-set-30493456072791.jpg?v=1698146515"},{"product_id":"plug-leads-spark-plug-8-cylinder-braided-90-degree-kit","title":"Ignition Lead Set 8 Cylinder Braided 90 degree kit","description":"\u003cp\u003eBeautiful braided spark plug kit for 8 cylinder engines.\u003c\/p\u003e\n\u003cp\u003e(note you need to assemble the kit)\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40209066131543,"sku":"BE10010","price":78.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be10010-plug-leads-spark-plug-8-cylinder-braided-90-degree-kit-30493518168151.jpg?v=1698146522"},{"product_id":"plug-leads-spark-plug-8-cylinder-black-90-degree-kit","title":"Ignition Lead Set, 8 Cylinder Black (90 degree distributor, 90 degree Spark Plug)","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eA Complete Plug Lead Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSelf Assembly (cut to length) and make up the leads to your desired length \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8x 90 degree plug boots\/cover and terminals for distributor cap \u003c\/li\u003e\n\u003cli\u003e8x 90 degree plug boots\/cover and terminals for spark plugs\u003c\/li\u003e\n\u003cli\u003eBlack lead \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlus additional lead and covers\/terminals to make up a coil lead\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 90 degree boot\/cover and 1 x 90 degree boot\/cover and terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Applications Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Flathead V8, Ford V8 Pick Up, Ford V8 Pilot, Allard and many other V8 classic and vintage car applications.\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40209073274967,"sku":"BE10015","price":53.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be10015-plug-leads-spark-plug-8-cylinder-black-90-degree-kit-30493579083863.jpg?v=1698146527"},{"product_id":"plug-leads-spark-plug-8-cylinder-black-90-degree-and-straight-kit","title":"Ignition Lead Set, 8 Cylinder Black (90 Degree Dizzy and Straight Plug)","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eA Complete Plug Lead Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSelf Assembly (cut to length) and make up the leads to your desired length\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8x 90 degree plug boots\/cover and terminals for distributor cap \u003c\/li\u003e\n\u003cli\u003e8x Straight plug boots\/cover and terminals for spark plugs\u003c\/li\u003e\n\u003cli\u003eBlack lead \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlus additional lead and covers\/terminals to make up a coil lead\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 90 degree boot\/cover and 1 x straight boot\/cover and terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Applications Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Flathead V8, Ford V8 Pick Up, Allard, Ford V8 Pilot and many other V8 classic and vintage car applications.\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40209082450007,"sku":"BE10016","price":52.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be10016-plug-leads-spark-plug-8-cylinder-black-90-degree-and-straight-kit-30493686267991.jpg?v=1698146542"},{"product_id":"plug-leads-spark-plug-leads-4-cylinder-braided-kit","title":"Ignition Lead Set 4 Cylinder Braided KIT (Ford Model A 1928 to 1931, Ford Model B 1932 to 1934)","description":"\u003cp\u003eA complete kit to made up set of leads suitable for 4 cylinder engines, Ford Model A 1928 to 1931, Ford Model B 1932 to 1934 and various other 4 cylinder vintage\/classic applications. \u003c\/p\u003e\n\u003cp\u003eBraided brown and white lead for a more in period look, black boots. The kit includes everything you need to make a set of spark plug leads. \u003c\/p\u003e\n\u003cp\u003ePlease note:- you will need to make this kit up. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40216647630935,"sku":"BE10003","price":32.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-plug-leads-spark-plug-leads-4-cylinder-braided-kit-30528687833175.png?v=1698147126"},{"product_id":"plug-leads-spark-plug-leads-4-cylinder-black-braided-kit","title":"Ignition Lead Set 4 Cylinder Black Braided KIT (Ford Model A 1928 to 1931, Ford Model B 1932 to 1934)","description":"\u003cp\u003e4 Cylinder Spark Plug Leads kit, suitable for a Ford Model A 1928 to 1931, Ford Model B 1932 to 1934 and various other 4 cylinder Vintage\/Classic car applications. \u003c\/p\u003e\n\u003cp\u003eBraided black HT lead with back boots. This is a kit that you will need to assemble. \u003c\/p\u003e\n\u003cp\u003eAll parts included in the kit to make up a full set. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40216648941655,"sku":"BE10004","price":32.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-b-e-ht1-plug-leads-spark-plug-leads-4-cylinder-black-braided-kit-30528697794647.png?v=1698147150"},{"product_id":"plug-leads-spark-plug-leads-4-cylinder-black-kit","title":"Ignition Lead Set Cylinder Black KIT (Ford Model A 1928 to 1931, Ford Model B 1932 to 1934)","description":"\u003cp\u003e4 Cylinder Plug Leads kit, suitable for Vintage\/Classic cars.\u003c\/p\u003e\n\u003cp\u003e Black HT lead, with black boots. \u003c\/p\u003e\n\u003cp\u003eSuitable for the Ford Model A 1928 to 1931, and the Ford Model B 1932 to 1934, and various other 4 cylinder applications.\u003c\/p\u003e\n\u003cp\u003eAll parts supplied in the kit, you will need to assemble. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40216649662551,"sku":"BE10002","price":26.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-plug-leads-spark-plug-leads-4-cylinder-black-kit-30528711196759.png?v=1698147133"},{"product_id":"friction-shock-absorbers-set-model-a-b","title":"Friction Shock Absorbers Set (Model A\/B)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet of 4. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese front friction shock absorbers are designed to replace the original hydraulic style shock absorbers in Model A Fords. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe have designed and built our very own shock absorbers for both the Model A and Model B. (Model B's have a slight modification to the pictures shown.) These are a very successful product - with us now in our 6th production run since the original prototype was proven successful.\u003c\/p\u003e\n\u003cp\u003eDirect replacement for the Model A\/B Hydraulic type of shock absorber\u003c\/p\u003e\n\u003cp\u003eFully adjustable on the friction pads\u003c\/p\u003e\n\u003cp\u003eIdeal for competition and trail cars\u003c\/p\u003e\n\u003cp\u003eEasy bolt on installation\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40241863983191,"sku":"","price":450.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-friction-shock-absorbers-set-model-a-b-30697085370455.jpg?v=1698147812"},{"product_id":"side-valve-cover-model-b","title":"Side Valve Cover - Model B","description":"GEM Side Valve Cover for Model B Ford","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40241864179799,"sku":"","price":197.37,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-side-valve-cover-model-b-30697085829207.jpg?v=1698147823"},{"product_id":"close-ratio-gears-model-a","title":"Close Ratio Gears - Model A","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eClose Ratio Gears\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClose ratio Gears are an excellent product for those who like to compete in Trial and Sprint events, or those wishing to tour with their car. With two different ratios available 20 Tooth to 27 Tooth (Four door or two door) or 18 Tooth to 29 Tooth (Coupes and Phaetons) - we can improve your driving experience and improve acceleration ability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces gap between 2nd and 3rd gear change\u003c\/li\u003e\n\u003cli\u003eAll gears have been made from EN40B Steel, NITRIDED and run in needle bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRatios:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e20 Tooth to 27 Tooth\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e1st 2.2 to 1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e2nd 1.3 to 1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e3rd 1 to 1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e18 Tooth to 29 Tooth\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e1st 2.59 to 1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e2nd 1.55 to 1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e3rd 1 to 1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eUpdate: 06\/10\/24 In production, estimated delivery Autumn 2025\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is strongly recommended that a quality lay shaft (BE lay shafts are made of hardened steel), new bearings and a good quality condition tower and components are used in the gearbox when assembled to prevent issues such as jumping out of gear.\u003c\/p\u003e\n\u003cp\u003eIt should be further noted that loose fit on the mainshaft could be an indication of an early mainshaft that had a Ford Service bulletin issued and a new shaft was changed from 1.2465 to 1.2485 width.  BE gears may not function correctly with the earlier shaft. \u003c\/p\u003e\n\u003cp\u003eits important to ensure your gearbox tower is in good order.\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40241864278103,"sku":"","price":986.02,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-close-ratio-gears-model-a-30697086156887.jpg?v=1698147825"},{"product_id":"crankshaft-pulley-b6312s-b-6312-s-b6312sb-e","title":"Crankshaft Pulley Ford Model A B 1928-32 A-6312-B B-6312-S Top Quality","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCrankshaft Pulley Ford Model A B 1928-32 A-6312-B B-6312-S British Made and Super strong (near unbreakable).\u003c\/p\u003e\n\u003cp\u003eFront Crank Pulley, with timing marks and reduced diameter for high revving race model. \u003c\/p\u003e\n\u003cp\u003eA reduced diameter reduces the water pump and dynamo speeds while the engine operates at a high RPM.   Ideal for non standard engines with high compression heads or where travelling at over 45-50 Mph.\u003c\/p\u003e\n\u003cp\u003eSuitable for Ford Model A 1928 to 1931 and Ford  Model B 1932 to 1934 \u003c\/p\u003e\n\u003cp\u003eMade from steel, top quality.\u003c\/p\u003e\n\u003cp\u003eSee also crank pulley timing indicator.\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40241869815895,"sku":"B6312SB\/E","price":145.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-b6312sb-e-crankshaft-pulley-30697098444887.jpg?v=1698147831"},{"product_id":"pulley-timing-indicator","title":"Pulley Timing Indicator","description":"Goes with BE made and supplied Crank Pulley.","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40245145665623,"sku":"","price":17.26,"currency_code":"GBP","in_stock":true}]},{"product_id":"front-timing-pulley-b6312a-b-6312a","title":"Front Timing Pulley A-6312-B\/E (Ford Model A 1928-1931, Ford Model B 1932)","description":"\u003cp\u003eFront Timing Pulley A-6312-B\/E \u003c\/p\u003e\n\u003cp\u003eTop Quality Steel.\u003c\/p\u003e\n\u003cp\u003eSuitable For Ford Model A 1928 to 1931 and Ford Model B 1932. 5.18\" dia. \u003c\/p\u003e\n\u003cp\u003eMade by Belcher Engineering  (in the UK).\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40245155594327,"sku":"A-6312-B\/E","price":111.85,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-b6312ab-e-front-timing-pulley-30721426620503.png?v=1698148360"},{"product_id":"model-a-ford-energising-brakes-pair","title":"Model A Ford Energising Brakes (Pair)","description":"\u003cp\u003eModel A Ford Energising Brakes (Pair)\u003c\/p\u003e\n\u003cp\u003eFord Model A (1928 to 1931) front energising brakes, designed and manufactured by B.E. Sold as a pair (image shows left hand). \u003c\/p\u003e\n\u003cp\u003eThis set up will greatly improve the braking capabilities of your Model A over the standard original equipment brakes that were fitted from factory. \u003c\/p\u003e\n\u003cp\u003eSold on a back plate exchange basis, so the price includes a core fee of £70.00 which is refundable on receipt of your original back plates (these must be in a good and serviceable condition). \u003c\/p\u003e\n\u003cp\u003eOption 1:- This is for standard size brake drums \u003c\/p\u003e\n\u003cp\u003eOption 2:- This is for brake drums with plus 040\" over the standard size drum \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Option 1:- Front energising brake set Standard size brake drum","offer_id":40246281306199,"sku":"BE-2021-SET","price":1002.82,"currency_code":"GBP","in_stock":true},{"title":"Option 2:- Front energising brake set plus 040\" drums","offer_id":40246281338967,"sku":"BE-2021\/040-SET","price":1002.82,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be-2021-set-front-energising-brakes-30709935898711_1.webp?v=1703433920"},{"product_id":"ford-model-a-ford-model-b-front-timing-cover-be-89031-a-89031","title":"Ford Model A, Ford Model B Front Timing Cover BE-89031 A-89031","description":"\u003cp\u003eFord Model A, Ford Model B Front Timing Cover BE-89031 A-89031\u003c\/p\u003e\n\u003cp\u003eIncludes an angle drive on the front that takes the distributor and has a rev counter drive which is connected to the gearing inside the timing cover, allowing for different types of rev counter drive.\u003c\/p\u003e\n\u003cp\u003eThe front can be disconnected in place, allowing for a vernier adjustable cam gear to be used.\u003c\/p\u003e\n\u003cp\u003eBE manufactured front timing cover for a Ford Model A 1928 to 1931 and a Ford Model B 1932 to 1934. Has a detachable front rev counter drive. \u003c\/p\u003e\n\u003cp\u003eBE-89031\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40246426566743,"sku":"BE-89031","price":804.59,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-be-89031-front-timing-cover-30710408544343.png?v=1698148919"},{"product_id":"valve-guide-solid-type","title":"Valve Guide (Solid Type) Ford Flathead V8 8BA-6510","description":"\u003cp\u003eSolid type valve guide for a Ford V8 1932 to 1948, with straight stem valves.\u003c\/p\u003e\n\u003cp\u003eMade by BE from CZ114 bronze.\u003c\/p\u003e\n\u003cp\u003eTop Quality.\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40246443343959,"sku":"8BA-6510B\/E","price":15.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-8ba-6510b-e-valve-guide-solid-type-30712897863767.png?v=1698148929"},{"product_id":"double-pulley-water-pump-v8-flathead","title":"Double Pulley Water Pump (Ford V8 Flathead), Pilot (Pair) 79-8501\/2BE","description":"\u003cp\u003eDouble pulley water pump for Ford V8 Flathead 1937 to 1941 90 and 100 HP Truck.  You are purchasing a pair that  Belcher Engineering has re-conditioned.  Please note that the price includes a core fee which is refundable to you on receipt of your old water pumps being returned to us and they are found to be in a serviceable condition (£40.00 inc vat per pump) \u003c\/p\u003e\n\u003cp\u003e79-8501BE right hand side\u003c\/p\u003e\n\u003cp\u003e79-8502BE left hand side \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40248779374679,"sku":"79-8501\/2BE","price":767.14,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-79-8501-2be-double-pulley-water-pump-v8-flathead-30719764955223.png?v=1698149635"},{"product_id":"lower-spring-clamp-plate-steel-a5458b-e-a-5458","title":"Lower Spring Clamp Plate (Steel) A5458B\/E A-5458","description":"\u003cp\u003eBelcher Engineering manufactured lower spring clamp. This holds the front spring to the crossmember. Originally made from cast iron, this particular item has been made from steel and so with not crack or break like cast iron. \u003c\/p\u003e\n\u003cp\u003eFit Ford Model A 1928 to 1931 A5458B\/E\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40250246496343,"sku":"A5458B\/E","price":53.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-a5458b-e-lower-spring-clamp-plate-steel-30719723208791.png?v=1698149674"},{"product_id":"ford-flathead-cylinder-head-decking-and-reprofiling-21-and-24-stud","title":"Ford Flathead Cylinder Head Decking and Reprofiling (21 and 24 Stud)","description":"\u003cp\u003eFord 21 and 24 stud Cylinder heads - have Belcher Engineering deck and re-profile your cylinder heads. Both cylinder heads would be set up on the mill and skimmed (machined true and flat) and the combustion domes would be re-profiled. \u003c\/p\u003e\n\u003cp\u003eThis is a service we offer on your existing cylinder heads, or alternatively we have second hand cylinder heads in stock so could supply as well as machine the heads. Please email or call if you would like us to supply heads. \u003c\/p\u003e","brand":"Belcher Engineering: Service","offers":[{"title":"Default Title","offer_id":40250330349655,"sku":"","price":271.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-service-ford-flathead-cylinder-head-decking-and-reprofiling-21-and-24-stud-30720110788695.png?v=1698149696"},{"product_id":"emergency-hand-park-brake-connecting-lever-steel-a2632-a-2632","title":"Emergency (Hand\/Park)  Brake Connecting Lever  (Steel) A2632 A-2632","description":"\u003cp\u003eFord Model A 1928 to 1931 hand brake connecting lever, but unlike the original these are made to last. Made from steel by the engineering team at BE, these will not crack or break like some of the repro items on the market. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40250687619159,"sku":"A2632B\/E","price":34.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-a2632b-e-emergency-hand-park-brake-connecting-lever-steel-30720147652695.png?v=1698149763"},{"product_id":"front-timing-pulley-indicator","title":"Front Timing Pulley Indicator (Ford Model A 1928-1931, Ford Model B 1932-1934)","description":"Front timing pulley indicator made by Belcher Engineering, suitable for Ford Model A 1928 to 1931 and Ford Model B 1932 to 1934.","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40251216625751,"sku":"PTI-B\/E","price":28.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-pti-b-e-front-timing-pulley-indicator-30721055031383.png?v=1698149822"},{"product_id":"crankshaft-pulley-single-belt-type-pilot","title":"Crankshaft Pulley Single Belt Type (Ford V8 Pilot 1948 to 1952)","description":"\u003cp\u003eCrankshaft pulley single belt type for a Ford V8 Pilot (English) 1948 to 1952.\u003c\/p\u003e\n\u003cp\u003eMade by Belcher Engineering. \u003c\/p\u003e\n\u003cp\u003eP6312BE \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40251434926167,"sku":"P6312BE","price":85.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-p6312be-crankshaft-pulley-single-belt-type-pilot-30722036662359.png?v=1698149868"},{"product_id":"heater-hose-union-for-flathead-water-pump-pilot","title":"Heater Hose Union For Flathead Water Pump E62A-18518B\/E  (Ford V8 Pilot 1948-1952)","description":"\u003cp\u003eHeater hose union for Flathead water pumps found on the Ford Pilot (English) 1948 to 1952. \u003c\/p\u003e\n\u003cp\u003ePart number E62A-18518B\/E. \u003c\/p\u003e\n\u003cp\u003eThread size 1\/4\" BSP \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMade by Belcher Engineering in Phos bronze. \u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40251829616727,"sku":"E62A-18518B\/E","price":29.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/belcher-engineering-e62a-18518b-e-heater-hose-union-for-flathead-water-pump-pilot-30722167734359.png?v=1777381218"},{"product_id":"ford-transmission-shaft-81a-7240","title":"Ford Transmission Shaft 81A-7240","description":"\u003cp\u003eFord transmission shaft 81A-7240 manufactured by Belcher Engineering. \u003c\/p\u003e\n\u003cp\u003eFits Ford Early V8 1936 to 1939 passenger, Ford Commercial 1936 to 1937 and Ford truck (122\" wheel base) with 3 speed transmission 1936 to 1947. \u003c\/p\u003e\n\u003cp\u003eShaft( transmission low and reverse gear shifter ) - steel ball type lock 6.25\" long \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40308698710103,"sku":"81A-7240","price":38.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/81A-7240.jpg?v=1698660462"},{"product_id":"ford-transmission-shaft-81a-7241","title":"Ford Transmission Shaft 81A-7241","description":"\u003cp\u003eFord transmission shaft 81A-7241 manufactured by Belcher Engineering. \u003c\/p\u003e\n\u003cp\u003eFits Ford Early V8 1936 to 1939 passenger, Ford Commercial 1936 to 1937 and Ford truck  with 3 speed transmission 1936 to 1947. \u003c\/p\u003e\n\u003cp\u003eShaft  (transmission intermediate and high shifter ) - steel ball type lock 5.88\" long \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40308700610647,"sku":"81A-7241","price":38.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/81A-7241.jpg?v=1698660791"},{"product_id":"ford-transmission-shaft-b-7240-b7240","title":"Ford Transmission Shaft B-7240-B\/E","description":"\u003cp\u003eFord transmission shaft B-7240 manufactured by Belcher Engineering. \u003c\/p\u003e\n\u003cp\u003eFits Ford Early V8 1932 to 1935 and Ford Pick Up 1932 to 1935 - with three speed transmissions. \u003c\/p\u003e\n\u003cp\u003eShaft  (transmission low and reverse gear shifter ) - plunger type lock. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40308727021655,"sku":"B-7240-B\/E","price":38.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/b-7240.jpg?v=1728040802"},{"product_id":"ford-transmission-shaft-b-7241-b7241","title":"Ford Transmission Shaft B-7241-B\/E","description":"\u003cp\u003eFord transmission shaft B-7241 manufactured by Belcher Engineering. \u003c\/p\u003e\n\u003cp\u003eFits Ford Early V8 1932 to 1935 and Ford Pick Up 1932 to 1935 - with three speed transmissions. \u003c\/p\u003e\n\u003cp\u003eShaft  (transmission intermediate and high shifter ) - plunger type lock. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40308757561431,"sku":"B-7241-B\/E","price":38.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/B-7241.jpg?v=1728040626"},{"product_id":"rear-spring-hanger-lug-bush-for-ford-model-a-and-ford-model-b","title":"Rear Spring Hanger Lug\/Bush for Ford  Model A and Ford Model B","description":"\u003cp\u003eBelcher Engineering manufactured item - top quality. Repair your rear axle spring hanger lug with a new bush. 2 required - one for each side. \u003c\/p\u003e\n\u003cp\u003eFits Ford Model A 1928 to 1931 and Ford Model B 1932 to 1934. \u003c\/p\u003e\n\u003cp\u003eSold individually. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40313147457623,"sku":"BE-89032","price":40.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/springhangerrepairbush2.jpg?v=1777389322"},{"product_id":"ford-model-a-rear-spring-clip-bar-a-5708-a5708a-a-5708-a-a5708ab-e-a5708b-a-5708-b-a5708bb-e","title":"Ford Model A Rear Spring Clip Bar  A5708A, A-5708-A, A5708AB\/E,","description":"\u003cp\u003eFord Model A rear spring clip bar A5708A made by Belcher Engineering Ltd, machined out of billet steel. Top Quality A5708AB\/E \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e A5708A. These brackets are used to hold the rear spring up in the cross member. These go under the spring and are what the rear spring U-bolt nuts tighten against. Need 2 per car. This is the shorter of the 2 spring clip bars that is used with the 10 or 12  leaf rear spring.  Approx 5\/8\" high. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40315529560151,"sku":"A5708AB\/E","price":38.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/A5708bBe.jpg?v=1698852811"},{"product_id":"ford-v8-pilot-front-axle-spindle-bolt-king-pins-e62a-3115-e62a-3115b-e-e62a-3111","title":"Front King Pins Ford V8 Pilot E62A-3115","description":"\u003cp\u003eFront King Pins Ford V8 Pilot E62A-3115, fits a 1948 to 1952 Ford Pilot. \u003c\/p\u003e\n\u003cp\u003eThese are made in house by Belcher Engineering\u003c\/p\u003e\n\u003cp\u003etop quality material and case hardened. \u003c\/p\u003e\n\u003cp\u003eSold as a pair. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40319766134871,"sku":"E62A-3115","price":228.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/E62A-3115.jpg?v=1737998450"},{"product_id":"allard-steering-spindle-bolts","title":"Allard Steering Spindle Bolts","description":"\u003cp\u003eAllard spindle bolts - these have been made by Belcher Engineering. Top quality material and then case hardened. \u003c\/p\u003e\n\u003cp\u003eSold as a pair. \u003c\/p\u003e\n\u003cp\u003ePlease check the following dimensions of your existing bolts:-\u003c\/p\u003e\n\u003cp\u003eDiameter:- 0.8125\" or 20.64mm\u003c\/p\u003e\n\u003cp\u003eLength of bolt from underneath the head to the centre line  of cotter pin:- 2.8120\" or 71.43mm\u003c\/p\u003e\n\u003cp\u003eOverall length (from underneath the head):- 5 3\/8\" or 136.5mm \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40319785631831,"sku":"B\/E-Allardspindle","price":234.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/AllardBolt1.jpg?v=1698930055"},{"product_id":"ford-pilot-brake-cable-assembly-rear-brake-cross-e62a-2584","title":"Ford Pilot Brake Cable Assembly (Rear Brake Cross) E62A-2584","description":"\u003cp\u003eFord V8 Pilot brake cable E62A-2584.\u003c\/p\u003e\n\u003cp\u003eRight Hand Side. \u003c\/p\u003e\n\u003cp\u003e1948 to 1952. \u003c\/p\u003e\n\u003cp\u003eThis is a new cable that has been made and tested in the UK.\u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40320807731287,"sku":"E62A-2584","price":76.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/e62A-2584c.jpg?v=1777457775"},{"product_id":"ford-model-a-finned-aluminium-valve-cover-a6520-a-6520-a6520alum","title":"Ford Model A Finned Aluminium Valve Cover A6520, A-6520, A6520ALUM","description":"\u003cp\u003eFord Model A finned aluminium valve cover made by Belcher Engineering, A6520, A-6520, A650ALUM \u003c\/p\u003e\n\u003cp\u003eFits your Ford Model A 1928 to 1931. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40328343453783,"sku":"A6520ALUM","price":191.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/a6520alum.jpg?v=1699276041"},{"product_id":"ford-model-a-electronic-ignition-kit-a12151ei","title":"Ford Model A Electronic Ignition Kit A12151EI","description":"\u003cp\u003eFord Model A 1928 to 1931, electronic ignition kit A1215EI\u003c\/p\u003e\n\u003cp\u003eKit includes full instructions. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e12v negative earth\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40328370290775,"sku":"A12151EI","price":185.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/A12151EI.jpg?v=1699281839"},{"product_id":"ford-flathead-generator-mounting-stud-352740","title":"Ford Flathead Generator Mounting Stud 352740","description":"\u003cp\u003eFord flathead generator mounting stud (manufactured by Belcher Engineering), part number 352740. \u003c\/p\u003e\n\u003cp\u003e9\/16\" x 2.60\" long \u003c\/p\u003e\n\u003cp\u003eFits Ford Passenger, Commercial and Truck 1932 to 1941. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40329799106647,"sku":"352740","price":10.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/352740.jpg?v=1749193456"},{"product_id":"ford-v8-pilot-upper-radiator-hose-e62a-8260-b-e62a-8260-86-e62a-8260-8286","title":"Ford V8 Pilot Upper Radiator Hose  E62A-8260-B, E62A-8260-86, E62A-8260\/8286","description":"\u003cp\u003eFord V8 Pilot (English) 1948 to 1952 radiator hose upper. Sold singularly \u003c\/p\u003e\n\u003cp\u003eHoses are made in England\u003c\/p\u003e\n\u003cp\u003eThese will also fit Early V8 1935 to 1936 vehicles if they have a later engine fitted (i.e a non-pump in head engine) \u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40332358221911,"sku":"E62A-8260-B","price":24.1,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/E62A-8260-B.jpg?v=1773674234"},{"product_id":"ford-v8-pilot-lower-radiator-hose-e62a-8286-e62a-8260-86-e62a-8260-8286","title":"Ford V8 Pilot Lower Radiator Hose  E62A-8286, E62A-8260-86, E62A-8260\/8286","description":"\u003cp\u003eFord V8 Pilot (English) 1948 to 1952 radiator hose lower. Sold singularly \u003c\/p\u003e\n\u003cp\u003eHoses are made in England\u003c\/p\u003e\n\u003cp\u003eThese will also fit Early V8 1935 to 1936 vehicles if they have a later engine fitted (i.e a non-pump in head engine) \u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40332362481751,"sku":"E62A-8286","price":20.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/e62a-8286.jpg?v=1699535739"},{"product_id":"gem-allard-cylinder-head-bolt-set-ford-early-v8-21-stud","title":"GEM\/Allard Cylinder Head Bolt Set (Ford Early V8 21 Stud)","description":"\u003cp\u003eHigh performance in house manufactured cylinder head bolts and good quality gasket set.\u003c\/p\u003e\n\u003cp\u003eSuitable for both Allard and GEM 21 stud V8 Cylinder heads.\u003c\/p\u003e\n\u003cp\u003e42 Studs in total.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40349968400471,"sku":"BE-2005","price":261.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/BE2005P1.jpg?v=1749798276"},{"product_id":"sump-plug-washer-52-6734-a-steel","title":"Sump Plug Washer 52-6734-A","description":"\u003cp\u003eSump Plug Washer - 52-6734\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFord Early V8 1939-1948\u003c\/li\u003e\n\u003cli\u003eFord Pick Up 1939-1947\u003c\/li\u003e\n\u003cli\u003eMercury 1939-1948\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits 1 1\/2\" sump plug. This is a Belcher Engineering manufactured item, top quality.\u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40364770852951,"sku":"52-6734-A","price":17.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/52-6734.png?v=1740760149"},{"product_id":"allard-front-radius-rod-bolts-b-e-3032","title":"Allard Front Radius Rod perch Bolts B\/E-3032","description":"\u003cp\u003eAllard Front Radius Rod perch Bolts B\/E-3032\u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40378080952407,"sku":"B\/E-3032","price":138.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/BE-3032.jpg?v=1776676252"},{"product_id":"transmission-shaft-seal-kit-a7111s-a-7111-s-a7111sb-e","title":"Transmission Shaft Seal Kit A-7111-S-B\/E","description":"\u003cp\u003eTransmission shaft seal kit for Ford Model A 1928 to 1931. A-7111-S-B\/E. \u003c\/p\u003e\n\u003cp\u003eTop quality item made by Belcher Engineering \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNot originally used by Ford. Seals both Reverse idler \u0026amp; Cluster gear shafts to minimize leakage. USA made. Keeps your 600W transmission lube where it belongs. A useful upgrade to your Model A.\u003c\/span\u003e\u003c\/p\u003e","brand":"USA Sourced","offers":[{"title":"Default Title","offer_id":40395157438551,"sku":"A-7111-S-B\/E","price":40.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/A7111SBE.jpg?v=1779188681"},{"product_id":"drag-link-ball-plug-spindle-connecting-rod-ball-seat-plug-b-3328-b3328-b-3328b-e","title":"Drag Link Ball Plug\/ Spindle Connecting Rod Ball Seat Plug B-3328, B3328, B-3328B\/E","description":"\u003cp\u003eDrag link ball plug and\/or spindle connecting rod ball seat plug B-3328, B3328, B-3328B\/E for Ford Model A 1928 to 1931 passenger and commercial, Ford Model B 1932 to 1934 passenger and commercial and Ford Pick Up 1928 to 1937. \u003c\/p\u003e\n\u003cp\u003eTop Quality  - made by Belcher Engineering \u003c\/p\u003e\n\u003cp\u003e2 required for each application. \u003c\/p\u003e","brand":"Belcher Engineering","offers":[{"title":"Default Title","offer_id":40398496170071,"sku":"B-3328B\/E","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/files\/B-3328.jpg?v=1702570206"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/3580\/2199\/collections\/BE_Automotive_copy_2_516acab5-63ce-42f6-b734-bfb4a47771d9.jpg?v=1717748399","url":"https:\/\/www.belchers.uk\/collections\/belcher-engineering-products\/belcher-engineering.oembed?page=3","provider":"Belcher Engineering","version":"1.0","type":"link"}