External Oil Relief Valve For Full Pressure Model A/B Engines

Belcher Engineering Own Design Made in house External Oil Relief Valve For Full Pressure Model A/B Engines 

This Allows You to External Set Oil Pressure When Fitting High Pressure Oil Pump When Building A Full Pressure Engine 

Fits To The Side Of The Valve Cover And Return oil Into The Valve Chest.

(Recommend Fitting It Close To The Front Of the Valve Cover So oil Is Retuned Over the Cam Gear Into The Sump Adding To Extra Lubrication To The Cam Gear)  

Come With Spacer Plate To Allow You To Use With Aftermarket Finned Valve Covers. 

Description of parts:- 

Part A  - this is the inside mount, the valve cover is then placed on top of this mount. 

Part B  - this is an additional spacer, which is placed on top of the valve cover (usually needed if the valve cover has fins) The valve cover is therefore sandwiched between the bottom mount and this spacer if its required. If your valve cover does not have fins then this spacer may not be required and part c can be placed directly on top of the valve cover. 

Part C -  Mounts either on top of the spacer if used, or directly on top of the valve cover. The bolts holes align so you can bolt from part c through to part A. The adjuster is under the decorative acorn cap. Remove the acorn cap to gain access to the grub screw (which is the adjuster). 

Please note:- as with any aftermarket product modifications maybe needed to enable this to fit/suit your application.